You're not touching anything else. Look through the options inside this menu for one that shows some form of toggle or switch beside the word "Enable" or "Unavailable" or even just "Off. Once you've kicked on the TPM, look around the screen for Save. Once you've saved this setting, restart the computer. You'll save yourself a headache if you keep one thing in mind about enabling Secure Boot.
Sometimes after you enable Secure Boot on a machine that's running software incompatible with Secure Boot, the machine will refuse to load Windows properly on restart. If that happens, don't panic. You didn't break anything. No matter which method you've used to get to the boot menu to begin with -- either via Windows 10's Start menu, or by the traditional method of hitting a specific key during start-up -- you can still use the traditional method to get back to the boot menu and disable Secure Boot again.
There are a few possible places this could be -- check under any tabs labelled Boot, Security or Authentication. Once you've checked the tabs and found the Secure Boot setting, toggle the switch beside it to turn it on or enable it.
Find your Save feature and, after you've saved your changes and exited the menu, your computer should reboot and bring you back to a normal Windows desktop. There are some PCs on which you may not be able to readily find the Secure Boot setting. Some computers will load Secure Boot keys under a Custom tab. Some computers won't allow you to enable Secure Boot until certain factory settings are restored.
If you're unable to access Secure Boot, or get roadblocked here, it's best to get help from a professional rather than take chances. Hit Save , exit the menu system, and restart your computer if it does not restart automatically. As noted by CNET sister publication ZDNet back in , motherboard manufacturers sometimes skimp on installing the actual TPM chip and instead send the boards out with only the part that allows the chip to connect to the board. If you find out that you were shorted on your TPM chip when you bought your PC, and you don't have a virtual or firmware TPM version, you still have a few options.
Your first option is to try to return your machine via your manufacturer warranty. That is, of course, assuming your machine's manufacturer is willing to install the chip it already sold you, or replace your model with one that has a chip. Your second, and most expensive, option is to simply buy a newer machine after verifying that it does, indeed, have an actual TPM 2.
If your warranty is already voided, your third option -- less expensive, but perhaps more difficult -- is to buy a whole new motherboard with a TPM 2. That's another place your local repair shop may be able to help. Finally, either you or your repair shop can try your fourth option: hunting down a TPM chip with the right specifications for your motherboard and installing it.
How can you do this thing? Step 3: Choose the first option in the new pop-up to keep your files. Then, follow the on-screen instructions to finish resetting your Windows PC. If you are having such a problem, follow these solutions above to fix it. Also, you can share them on Twitter to let more persons know. Windows system problems are very common. If you encounter one like Windows 11 not booting up, you must spend much time and take effort to fix it.
Even sometimes the result is frustrating eventually. But if you have a backup of the system beforehand, you can easily restore your Windows to an earlier state and reduce downtime. Creating a system image is worth recommending. Besides, sometimes important files may get lost during PC repair due to mistaken operations.
So, file backup is very important. We recommend backing up your crucial files before fixing your issues. It supports file, folder, disk, partition, and system backup and recovery. File sync and disk cloning can also be supported. With it, you can also only back up the newly added and changed data and back up your data on a scheduled time. Well then, how can you create a system image of Windows 11 or back up files?
Follow the steps below now. Step 1: Download MiniTool ShadowMaker by clicking the following button and then install it on your computer. Free Download. Step 3: By default, this software will back up system partitions.
I prefer Kaspersky's free disk as it only requires downloading the image and using Etcher to image a flash drive or other writable disk. Etcher works in Windows, macOS, and Linux. You can then boot into the afflicted computer using the rescue disk and remove malware preventing the computer from booting.
Download: Kaspersky Rescue Disk Free. It might still be possible to boot into the Command Prompt. Using this interface, you can perform more troubleshooting procedures.
You'll need to have Windows 10 on a bootable disk or USB drive to perform the procedure, so use another computer to set that up before you get started. To boot to the Command prompt, start your computer. While it's initializing, watch out for details of a combination of keys that will allow you to enter the BIOS.
This information is typically delivered alongside the vendor logo. Your choice here will depend on where your copy of Windows 10 is located. Again, the specifics of this process may vary from one system to another, so consult the on-screen instructions. Next, insert the disk or drive containing Windows 10 into your system, save your configuration, and restart your PC. Enter the requested language, currency, and input preferences, then select Repair your computer on the next screen.
If you're already booting Windows 10 from a disk or drive, it's well worth utilizing a couple of utilities that are available as part of the process.
Once you've booted from the drive as detailed above, you'll get access to options that can get your PC back on track. System Restore is a utility that allows you to return to a previous Restore Point when your computer was working normally. It can remedy boot problems caused by a change you made rather than a hardware failure. Startup Repair is a general-purpose troubleshooter for issues that prevent Windows from starting up.
If you're struggling to find the source of your boot issues, it's a good idea to run the utility in case it can find a solution. A system with more than one drive installed can cause boot issues for Windows 10 users if their operating system OS volume has its drive letter unintentionally unassigned.
However, you can fix this problem with a minimum of fuss by booting to the command prompt interface. Boot to a command prompt window as explained above, then enter the following to run the disk partition utility:. Once this is done, input list volume to print the details of all the volumes currently hooked up to your system. If your boot volume doesn't have a letter drive assigned, you will need to assign one.
To assign a letter to a drive, you can use the select and assign letter commands. As always, be very careful when making changes in the command prompt. If methods 1, 2 and 3 do not fix the problem, replace the Bootmgr file from drive C to the System Reserved partition. To do this, follow these steps:. If Windows cannot load the system registry hive into memory, you must restore the system hive. If the problem persists, you may want to restore the system state backup to an alternative location, and then retrieve the registry hives to be replaced.
Starting in Windows 10, version , Windows no longer automatically backs up the system registry to the RegBack folder. This change is by design, and is intended to help reduce the overall disk footprint size of Windows. To recover a system with a corrupt registry hive, Microsoft recommends that you use a system restore point. For more details, check this article. If the system gets stuck during the kernel phase, you experience multiple symptoms or receive multiple error messages.
These include, but are not limited to, the following:. For example, "0xC2" , "0xB" , "inaccessible boot device" and so on. The screen is stuck at the "spinning wheel" rolling dots "system busy" icon. If either of these options works, use Event Viewer to help identify and diagnose the cause of the boot problem. To view events that are recorded in the event logs, follow these steps:.
In the console tree, expand Event Viewer, and then click the log that you want to view. For example, click System log or Application log. On the Edit menu, click Copy , open a new document in the program in which you want to paste the event for example, Microsoft Word , and then click Paste.
To troubleshoot problems that affect services, do a clean boot by using System Configuration msconfig. Select Selective startup to test the services one at a time to determine which one is causing the problem. If you cannot find the cause, try including system services. However, in most cases, the problematic service is third-party.
Disable any service that you find to be faulty, and try to start the computer again by selecting Normal startup.
0コメント